Welcome to The Fleet Store
account
wishlist

Cart

RoadHawk HD-2

In stock

The RoadHawk HD-2 represents the pinnacle of current dash cam technology and is RoadHawk’s most advanced camera to date.

The RoadHawk HD-2 uses the best components available to provide drivers with crisp, SuperHD footage and unrivalled low-light / night vision, ensuring that you are completely protected in all conditions.

Most drivers do not even see the camera from a normal driving position.
Enough cable is provided to route the power to the camera around the screen and to the accessory socket.

RoadHawk HD cameras can also be easily wired directly to your car or vehicle using an optional hard wiring kit.

Most customers tell us they can install the RoadHawk HD themselves out of the box in 10 to 15 mins.

£249.95

Clear
Compare

You can add a hard wiring kit to connect this kit up to a permanant 12v supply (direct to the battery) or to a circuit on the ignition so the camera only powers up when the engine is running. We can even have it installed for you by a fully trained engineer.

RoadHawk HD

The RoadHawk HD-2 represents the pinnacle of current dash cam technology and is RoadHawk’s most advanced camera to date.

The RoadHawk HD-2 uses the best components available to provide drivers with crisp, SuperHD footage and unrivalled low-light / night vision, ensuring that you are completely protected in all conditions.

What separates the RoadHawk HD-2 from the competition?

•    UK development – the RoadHawk HD-2 is designed and developed in the UK, ensuring that it meets the needs and safety standards of the UK market.

•    Chipset – the Ambarella A7L chipset is one of the most advanced chipsets on the market as used in the world’s leading action cameras.

•    Resolution – the RoadHawk HD-2 can supply some of the highest quality footage seen on a dash cam to date with the ability to record at various high resolutions including SuperHD (2304x1296p) and 1080p at 60fps.

•    HDR – ‘High Dynamic Range’ allows the camera to meter for light and dark areas of video, combining them to create the best possible image quality at all times in all lighting conditions.

•    De-Warp – even though the RoadHawk HD-2 features a 125 degree wide angle lens, the de-warp technology ensures there is no distortion all the way to the edge of the image.

•    EIS – ‘Electronic Image Stabilisation’ ensures that RoadHawk HD-2 footage is able to soak up vibrations while driving, keeping the footage stable and crisp.

•    Precision GPS – the RoadHawk HD-2 features the most accurate GPS presently seen in any dash cam.  At 10Hz, the GPS in the RoadHawk HD-2 is more accurate than that of most sat navs on the market right now.

•    Storage – the RoadHawk HD-2 includes a 16GB SDHC memory card and is capable of using up to 512GB SDXC memory cards, the highest capacity cards currently available.

•    MAC & PC compatible – RoadHawk HD-2 software is one of the few dash cams available with software available for both MAC and PC.

•    3 Axis G-Force Sensor – The RoadHawk HD-2 features a G-force sensor that will detect shocks to the vehicle. This is activated automatically from the impact of a collision, manually using the ‘Event’ button on the rear of the camera or even remotely using the optional remote ’Event’ button.

RoadHawk have a full range of accessories available for the HD-2, including suction mounts, remote event buttons, connectivity options for telematics devices, locking solutions, extended GPS antennas and easy fit hard wiring kits

Download the HD-2 Spec Sheet PDF

Small and unobtrusive design…

We designed the RoadHawk HD based on the feedback from our customer from our previous cameras.
Use the provided 3M adhesive pad to mount the camera behind your rear view mirror.

Most drivers do not even see the camera from a normal driving position.
Enough cable is provided to route the power to the camera around the screen and to the accessory socket.

RoadHawk HD cameras can also be easily wired directly to your car or vehicle using an optional hard wiring kit.

Most customers tell us they can install the RoadHawk HD themselves out of the box in 10 to 15 mins.

2 year roadhawk warranty
All RoadHawk Dash Cameras have a full 2yr Warranty included.

DOWNLOAD: RoadHawk HD Viewing Software (Windows)
DOWNLOAD: RoadHawk HD Viewing Software (MAC)

MAC Users you may need to install Adobe Air before installing the RoadHawk software..


Video Guide for RoadHawk HD and RoadHawk HD Software
RoadHawk HD Software is both PC and MAC compatible. We designed this app to be as easy to use as possible.
It will auto update your camera for you and we continue to add more features at regular intervals.

roadhawk hd player software

When you run the RoadHawk software it will look for the SD card from the RoadHawk HD camera. If the SD card is blank, the software will NOT see the SD Card.
You MUST use the SD card in the camera BEFORE using this software.

Once you insert the SD card from the camera in to your computer it will list all the video files on that card on the right hand side of the screen.
A USB card reader is supplied with the RoadHawk HD camera.

Just above the list of files you will see three buttons. EVENT, NORMAL and ALL.
file filter
File Filter
EVENT: will list only the files that have been created by the camera because of an EVENT.
This could be a collision, a pothole or a manual event created by pressing the E button on the camera.
NORMAL: Will display only NORMAL video files created by the camera, this should be your normal everyday driving.
Depending on the size of the SD card you are using and also depending on the quality settings, you should expect to see your most recent journeys here.
ALL: This will display all files on the card in the order they were created.
Please note that the earliest files will normally be EVENT files as these stay on the card longer than NORMAL video files.

At this point, you might be seeing a video recorded several days or weeks ago at the top of the list. Towards the bottom of the list you will start to see your normal everyday driving videos. It is normal to have gaps in these files because of the way the camera overwrites the earliest files recorded.
roadhawk hd map
Map

Below the list of video files you will see the MAP. This will show the location of the vehicle at the time the video was recorded. If the camera was not receiving a GPS signal at the time of recording or if your computer does not have an internet connection then you might not see the MAP.
Within the MAP screen you can use the buttons in the top left to navigate around the MAP and to zoom in or zoom out.
roadhawk hd g-force sensor
G-Force Sensor
Below the main windows is a G-Force Meter display. The small spot in the centre of this meter represents the G-Force experienced by the camera at the time the video was recorded.
As the vehicle accelerates you would expect to see the spot move towards the bottom of the meter. Braking will show up as the spot moving upwards on the meter. Cornering will send the spot left or right. The more heavy the manoeuvre, the further the spot will travel on the graph.
roadhawk hd speed display
Vehicle Speed

Just below the main video window is the speed of the vehicle shown be default in MPH. Clicking here will change the display to KPH and vice versa.

roadhawk hd settings
RoadHawk HD Camera Settings

Click the settings icon within the software to change the settings on your camera. When you make a change to the settings, the software will save a small config file to your SD card. The next time the camera is powered on with this card inserted it will read the config file and set itself accordingly.

In this menu you can change:

Resolution: The size of the image being recorded.
Frame Rate: Set the amount of frames being recorded per second.
Time Zone: Set your local time zone.
File Length: Set the length of time before a new file is started.
LOOP: Choose if the camera should loop record or simply stop recording when the SD card is full.
Mic Sensitivity: Set the volume of the internal mic. (Lower = quieter: 0 = off)
Speaker Volume: Set the volume of the internal speaker in the camera.
EVENT Sensitivity: Set how sensitive the G-Force sensor is. (Lower = less sensitive)
Contrast: Sets the contrast settings for the image produced by the camera.
Brightness: Sets the brightness of the image produced by the camera.
Saturation: Sets the saturation (colour) of the image produced by the camera.
Bit-Rate: Set the overall video quality. (Higher = better quality)
Record Mode: Choose if you want the camera to record EVENTS or just NORMAL video.
Spot Metering: Enables/Disables spot metering mode on the image produced by the camera.
Timestamp: Enables or disables the timstamp recorded on the image by the camera.

Notes on the new software settings for the RoadHawk HD Dash Camera:
In most cases the default settings for the camera will provide the optimal image quality. We have now added the ability to tweak these settings so you can fine tune them to your own preference. By adjusting the contrast and brightness settings it is possible to improve low light performance but at the cost of some image quality during day time driving. The saturation setting controls how much colour in the image the camera will produce.

Spot Metering:
When this is selected to ON the camera will measure the exposure settings from the center of the image instead of the outside. Set this to ON of the camera is to be mounted on a roll bar. This will stop the camera from over exposing the image through the windsreen and underexposing the inside of the vehicle.

Timestamp:
The RoadHawk dash camera gets its time and date from GPS. When this setting is on, the time and date are imbedded in to the right lower corner of the image. Disabling this will remove the time and date from the video. If you are using the RoadHawk HD as a dash camera then it is recommended to leave this setting enabled for evidential purposes. NOTE: Even when the timestamp is disabled, the file names of the videos produced by the dash camera will still be created using the time and date found whilst the camera is recording.

FEATURES:

•    Super HD 2304x1296p at 30fps, 1080p & 720p at up to 60fps video recording
•    HDR sensor providing excellent video quality in all lighting conditions
•    SD XC compatible (4GB to 512GB)
•    External GPS antenna connection
•    External Audio input connection
•    10hz GPS Receiver
•    A7L processor for high quality H.264 encoding
•    User controlled video bit rate setting
•    User controlled G-Force, audio input and speaker volume settings
•    Audio can be disabled
•    3x adhesive mounts ensuring optimum fit for all vehicles
•    1/4” standard camera mount thread for use with numerous camera mounts and grips
•    Low level algorithm for detecting SD card errors and warning the user of any potential problems
•    Alarm input connection for remote triggering events and output for communicating with tracking devices

SPECIFICATIONS:

•    Chipset – Ambarella A7/LA70 chip, support 1296p / 30fps, 1080p / 60fps, HDR 1080p / 30fps, 720p / 60fps and 720p / 30fps
•    Audio – Variable sensitivity internal mic – External mic input (3.5mm jack)
•    Encoding – H.264 . MP4 Files with embedded G-Force and GPS data
•    Bitrate – Adjustable from 4Mbits to 20Mbits
•    Loop Mode – One minute or five minute files continuous loop with file locking
•    Normal Mode – Up to 30 min long files (no looping or file locking)
•    GPS – 10Hz GPS receiver with internal antenna
•    Power – 12v, 5m Power cable with Aux plug or optional 12/24v hard wiring solution
•    EIS – Electronic image stabilisation
•    G-Force – 3D G-force Sensor installed (variable sensitivity)
•    Internal Power – 2 x Super capacitors to ensure safe camera shutdown
•    Memory – SD XC compatible (up to 512GB)
•    Sensor – Omnivision OV4689 with super low light sensitivity with HDR
•    Lens – 6 element glass, f/2.0, wide angled 125 degree lens
•    Mounting – Standard RoadHawk adhesive mounting ¼” Camera thread for suction/clamps mounts
•    Compatibility – Windows 7 or above and OSX 10.9 or above
•    Adjustable Settings – Mic sensitivity, speaker volume, event sensitivity, contrast, brightness, saturation, metering

CONTENTS:

•    1 x RoadHawk HD-2 1080p Dash Cam
•    1 x 16GB Class 10 SD Card
•    1 x Accessory socket power cable
•    1 x Short windscreen mount
•    1 x Adjustable windscreen mount (For  steep screens)
•    1 x Long arm windscreen mount (For vertical screens)
•    1 x User manual
•    1 x Card reader
•    5 x Windscreen clips

Included Memory Card

128 GB Memory Card, 32 GB Memory Card, 64 GB Memory Card, No Memory Card

Hard-Wired Install

,

Reviews

There are no reviews yet.

Be the first to review “RoadHawk HD-2”